The XC Hybrid Controller delivers extensive power without the plug. Built with all the same efficient water management features as the XC Controller, the XC Hybrid operates DC latching solenoids with battery power or a plug in 24VAC transformer. Ready for outdoor or indoor installation, the XC Hybrid comes in 6 or 12 station, plastic or stainless steel models. That means it’s the right solution for a wide range of residential and commercial applications. Small residential areas, parks, gardens, roadway medians and roundabouts are ready for the XC Hybrid. With ‘Easy Retrieve’ memory backup and on-board, non-volatile memory, you’ve got the assurance to recall all of the controller’s watering programs.
Number of stations: 6 or 12
3 power options: ambient-light-compatible solar panel, battery, or AC power
Battery-life indicator for battery replacement
Stainless steel enclosure protects against vandalism
3 programs with 4 start times each and up to 4-hour run times
Suspend irrigation up to 99 days during the off-season
Easy Retrieve™ memory backs up the full irrigation schedule
Delay Between Stations for slow-closing valves or pump recharge
Seasonal adjustment for quicker schedule adjustments without changing run times
Solar panel provides maintenance-free operation
Mounts to flat surfaces or steel posts
EASY RETRIEVE® MEMORY
A manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.
ONE TOUCH MANUAL START AND ADVANCE
Allows any program to be started manually by simply pressing and holding the right arrow key. Advance through stations in a program by pressing the right arrow key again.
RAIN SENSOR BYPASS
Toggle switch that controls the input signal from the weather sensor (Rain-Clik, Freeze-Clik, Wind-Clik, etc). When the switch is set to “Bypass” the controller will ignore the signal from the sensor and irrigate normally.
PROGRAMMABLE RAIN DELAY
The Programmable Rain Delay feature incorporates a user specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. This will prevent watering during an extended period of inclement weather, but will resume watering automatically without requiring a return visit to the controller. The controller displays the number of days remaining before watering resumes.
This feature offers protection against unreliable power, retaining current time, date, and program data.
GLOBAL SEASONAL ADJUSTMENT
This feature allows for quick adjustments to irrigation run times through a percentage scale. During peak season, set the seasonal adjustment to 100%. If weather conditions require less water, enter the appropriate percentage value (i.e. 50%) to cut down irrigation run times without the need to adjust each station in the program.
DELAY BETWEEN STATIONS
Users can program a delay between stations as the controller advances from one station to the next. This delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.
Unfortunately, some stock will not be replenished. Should your selected product not become available within three months, your request will be deleted automatically.
Please note that we advise you to act on this notification as soon as you receive it. Due to this item's popularity, stock could be sold out if you wait too long. Stock is not reserved, so it would be in your best interest to shop your desired item immediately after receiving the notification.